

- Home
- Our Services
- Wiring & Rewiring
Licensed & insured
Electrical Wiring & Rewiring Services for Homes & Businesses in Metro Atlanta, GA
Aging wiring, a new addition or a full rewire: we bring the wiring in your home or business up to current code, with permits and inspections handled for you.

SAFE WIRING STARTS
Professional Electrical Rewiring in Metro Atlanta
If you have been searching for electrical rewiring near me, Kalahari Electrical Services is ready to help protect your home or business with safe, code-compliant wiring. Every building depends on a reliable electrical system, and the wiring behind your walls is the backbone of that system. Whether you own a century-old bungalow in Decatur, a mid-century ranch in Lawrenceville, or a growing commercial space in Duluth, outdated or deteriorating wiring puts your property and your family at risk.
Founded in 2001 by Jan Rossouw, Kalahari Electrical is a licensed and insured, family-owned Georgia electrical contractor that has served Metro Atlanta for over two decades. Our background-checked, drug-tested, and professionally trained technicians handle everything from targeted old wiring replacement in a single room to a complete house rewiring service that brings your entire property up to modern electrical codes. We hold Georgia license EN213186 and back every project with a 100% satisfaction guarantee, because we stand behind our work.
Below, you will find the warning signs that indicate your wiring needs attention, what a full electrical wiring upgrade involves, the factors that influence cost, and how our process keeps your project on schedule and fully permitted.

Warning Signs Your Home Needs Rewiring
Aging wiring does not always fail dramatically. More often, it sends subtle signals that homeowners overlook until a serious hazard develops. Recognizing these signs early can prevent electrical fires, shock injuries, and costly property damage. If you notice any of the following, schedule an inspection right away:
- Flickering or dimming lights that occur even after you replace bulbs. This usually points to loose connections, corroded wires, or circuits that can no longer carry the load.
- A burning or acrid smell near outlets, switches, or your breaker panel. This is one of the most urgent red flags, often indicating melting insulation or arcing behind the wall.
- Warm or discolored switch plates and outlet covers. Heat where it should not exist suggests wiring that is overloaded or poorly connected.
- Frequent breaker trips or blown fuses. Circuits that cannot keep up with modern demand are a fire risk and a sign your system needs an electrical wiring upgrade.
- Two-prong (ungrounded) outlets throughout the home. These indicate wiring that predates modern grounding requirements, leaving electronics and occupants unprotected from surges.
- Aluminum branch wiring (common in 1960s and 1970s homes). Aluminum expands and contracts differently than copper, creating loose connections at terminals that can overheat and arc.
- Knob-and-tube wiring. Many older Atlanta-area homes, particularly those built before the 1950s in neighborhoods like Inman Park, Grant Park, and parts of Lawrenceville, still contain knob-and-tube systems. This wiring type lacks a ground conductor, deteriorates when covered by insulation, and is considered obsolete by every modern electrical code.
If even one of these conditions exists in your home, contact Kalahari Electrical for a thorough evaluation. Early detection turns a potential emergency into a planned, manageable project.

FULL-SCOPE SERVICE
What Our House Rewiring Service Includes
A complete house rewiring service is one of the most involved electrical projects a property can undergo, and it demands meticulous planning, skilled execution, and strict code compliance. At Kalahari Electrical, every rewiring project follows a detailed, phased approach designed to minimize disruption while maximizing safety.
Comprehensive assessment. Our technicians inspect your existing wiring type, panel capacity, grounding system, and circuit layout. We document every deficiency and create a detailed scope of work before any wire is pulled.
Permitting and code coordination. Georgia and most Metro Atlanta municipalities require electrical permits for rewiring work. We handle the entire permit process on your behalf, including submitting plans, scheduling inspections, and ensuring the finished installation satisfies current National Electrical Code (NEC) and local amendments. Working without a permit can void your homeowner's insurance and create serious problems when you sell.
Old wiring replacement. We remove outdated conductors, including knob-and-tube, aluminum branch circuits, and deteriorated Romex, then install modern copper wiring rated for your home's actual electrical demand. Every junction box, outlet, and switch is upgraded as part of the process.
Panel evaluation and upgrade. Many older homes still operate on 100-amp or even 60-amp panels. If your panel cannot support the new wiring layout or future loads such as EV charger installations, we recommend a panel upgrade to ensure your system has adequate capacity. This is especially important for homeowners considering electric vehicle charging; a dedicated 240-volt EV circuit can draw 40 amps or more, and your panel must have room to accommodate it safely.
Testing, labeling, and final inspection. Once wiring is complete, we test every circuit, properly label your breaker panel, and coordinate the final municipal inspection. You receive documentation of the work for your records and your insurance carrier.

What Affects Your Home Rewiring Cost
Understanding home rewiring cost starts with knowing the variables that make every project unique. We never quote a one-size-fits-all price because the scope, complexity, and conditions of your property all play a role. Here are the primary factors our estimators evaluate:
- Square footage and number of stories. Larger homes require more wire, more circuits, and more labor. Multi-story and split-level layouts add complexity because running new conductors through finished walls and between floors takes additional time and technique.
- Existing wiring type. Replacing knob-and-tube wiring or aluminum branch circuits often involves more extensive removal and remediation than swapping out standard Romex.
- Wall and ceiling access. Open-wall renovations or unfinished basements and attics make wire routing easier. Homes with plaster-and-lath walls or limited crawlspace access require more careful methods to minimize cosmetic damage.
- Panel size and upgrade needs. If your electrical panel must be replaced or upsized to support the new wiring and future loads like EV charging, the panel work adds to the project scope.
- Number of circuits, outlets, and fixtures. More circuits and device locations mean more materials and labor. Kitchens, bathrooms, and home offices typically require dedicated circuits per code.
- Permit and inspection fees. These vary by municipality across Metro Atlanta. We include permit coordination in our proposals so there are no surprises.
- Code-required upgrades. Current code may mandate AFCI or GFCI protection, tamper-resistant receptacles, or smoke detector interconnection that your old system lacked.
Because every home is different, the best way to understand your investment is to request an estimate from Kalahari Electrical. We walk through the scope with you, explain each line item, and make sure you know exactly what you are paying for before work begins.

INSURANCE & SAFETY
How Outdated Wiring Affects Your Insurance
Many Metro Atlanta homeowners are surprised to learn that outdated wiring can directly impact their homeowner's insurance coverage. Insurance carriers assess risk, and older electrical systems present a significantly higher fire risk. Here is what you should know:
Policy denial or non-renewal. Some carriers will refuse to issue or renew a policy if a home contains knob-and-tube wiring, aluminum branch circuits, or a Federal Pacific or Zinsco breaker panel. If your insurer learns about these conditions during an inspection or after a claim, you could lose coverage.
Higher premiums. Even when coverage is available, older wiring can result in elevated premiums because the statistical likelihood of an electrical fire is higher. A modern electrical wiring upgrade can help bring those premiums down.
Claim denial after a loss. If a fire originates from wiring that was known to be deficient or that should have been replaced under code, your insurer may deny the claim. Unpermitted electrical work creates similar exposure.
Real estate implications. During a home sale, an inspection that reveals outdated wiring often triggers buyer demands for rewiring before closing. Addressing the issue proactively protects your equity and avoids last-minute negotiation pressure.
Kalahari Electrical provides thorough documentation of every rewiring project, including permit records and inspection sign-offs. This paperwork gives your insurance company the evidence it needs to confirm that your electrical system meets current standards. If you are unsure whether your wiring could affect your coverage, give us a call at 678-665-2309 and we will schedule an assessment.

WHY KALAHARI
Metro Atlanta's Trusted Electrical Rewiring Team
When you search for electrical rewiring near me, you deserve a contractor whose reputation and credentials match the seriousness of the work. Kalahari Electrical Services has been a trusted name across Metro Atlanta since 2001, earning a 4.9 Google rating and an A+ BBB rating through consistent, quality craftsmanship and honest communication.
Here is what sets us apart:
- Licensed and insured under Georgia electrical license EN213186, so your project is protected from start to finish.
- Family-owned values. Founded by Jan Rossouw, our company treats every customer the way we would want our own family treated.
- 100% satisfaction guarantee. We stand behind our work and will not consider a project complete until you are fully satisfied.
- Professionally trained technicians who are background-checked and drug-tested for your peace of mind.
We proudly serve homeowners and businesses throughout Lawrenceville, Suwanee, Duluth, Buford, Snellville, Lilburn, Norcross, Johns Creek, Alpharetta, Roswell, Decatur, and the greater Metro Atlanta area. Whether you need a targeted old wiring replacement in a single room or a comprehensive whole-home rewiring project, our team has the experience and the integrity to deliver safe, lasting results.
Ready to get started? Call Kalahari Electrical at 678-665-2309 or request your estimate online. Let us make sure the wiring behind your walls is as dependable as the power you count on every day.
Spread the cost of your electrical project
Panel upgrade, EV charger or generator on a budget that works for you, through the Synchrony Project Card. Prequalify with no impact to your credit score.
FAQ
Frequently asked questions
Still have a question? Call 678-665-2309 and a licensed electrician will answer it.
How do I know if I need electrical rewiring near me?
Common indicators include flickering lights, a burning smell near outlets or switches, frequent breaker trips, warm or discolored cover plates, and the presence of knob-and-tube or aluminum wiring. If your home was built before 1980 and has never been rewired, an inspection from a licensed electrician is strongly recommended.
What factors determine home rewiring cost?
The main factors include your home's square footage, number of stories, existing wiring type, wall access conditions, panel capacity, number of circuits and outlets, permit fees, and any code-required upgrades such as AFCI or GFCI protection. Because every home is different, we recommend requesting an estimate so you know exactly what is involved.
Does a house rewiring service require a permit in Georgia?
Yes. Most Georgia municipalities, including those across Metro Atlanta, require an electrical permit for rewiring work. Kalahari Electrical handles the entire permit process, from submission through final inspection, to ensure your project is fully code-compliant and properly documented for your insurance records.
Can old wiring affect my homeowner's insurance?
It absolutely can. Many insurance carriers will deny coverage, refuse renewal, or charge higher premiums for homes with knob-and-tube wiring, aluminum branch circuits, or outdated breaker panels. Completing an electrical wiring upgrade and providing your insurer with permit and inspection documentation can help resolve these issues.
Is my electrical panel large enough to support EV charger installation?
A dedicated EV charging circuit typically requires 240 volts and can draw 40 amps or more. Many older panels do not have sufficient spare capacity to handle this load safely. During a rewiring project, our technicians evaluate your panel and recommend an upgrade if needed, ensuring your home is ready for current and future electrical demands.
How long does a whole-home electrical wiring upgrade take?
The timeline depends on the size of the home, the complexity of the existing wiring, wall access, and permit scheduling. A smaller single-story home may take significantly less time than a large multi-story property with plaster walls. During your estimate, we provide a projected timeline so you can plan accordingly.
Areas We Serve
Kalahari Electrical Services covers Gwinnett County and the greater North Metro Atlanta area. We proudly serve:
- Alpharetta
- Atlanta
- Auburn
- Avondale Estates
- Bethlehem
- Braselton
- Brookhaven
- Buford
- Chamblee
- Clarkston
- Dacula
- Decatur
- Doraville
- Druid Hills
- Duluth
- Dunwoody
- Flowery Branch
- Grayson
- Hoschton
- Johns Creek
- Lawrenceville
- Lilburn
- Loganville
- Marietta
- Milton
- Norcross
- North Druid Hills
- Peachtree Corners
- Roswell
- Sandy Springs
- Scottdale
- Smyrna
- Snellville
- Stone Mountain
- Suwanee
- Tucker
- Vinings
- Winder
Everything we do
Other electrical services
Commercial Electrical Services
Wiring, panels, lighting and code work for offices, retail and restaurants.
Learn moreBreakers & Fuses
Tripping breakers and blown fuses diagnosed and replaced, often the same day.
Learn moreElectrical Inspection
Panel, wiring, outlets and grounding checked by a licensed electrician.
Learn moreSmoke Detectors
Hardwired, interconnected smoke and CO detectors installed to code.
Learn moreElectrical Panels
Full, outdated or overheating panel? Upgrades with permit and inspection included.
Learn moreGenerator Installation
Standby generators with automatic transfer switches, sized and installed for your home.
Learn moreEmergency Electrical Service
24/7 help for outages, sparks, burning smells and panel failures. Call any hour.
Learn moreRecessed Lighting
Can lights laid out, cut in and dimmed, in finished ceilings or new builds.
Learn more- Warranties & Peace of mind
- Same-day appointments with available spots
- 24/7 emergency services
- Prompt award winning technicians
From the blog
Related reading

Electrical Panel Upgrade vs Rewiring: Which Do You Need?
A new panel and new wiring solve different problems. Before a renovation locks in your budget, here is how to…

How Long Does It Take to Rewire a House? Room by Room
A whole-house rewire usually takes one to four weeks, but size, access, wall type, and inspections decide where your home…

Hot Tub Electrical Requirements in Georgia: Wiring & Permits
Installing a hot tub in metro Atlanta involves more than picking a spot in your backyard. Here is what Georgia…
