Voted Best of Gwinnett 2025
  1. Home
  2. Our Services
  3. Outlets & Switches

Licensed & insured

Electrical Outlet & Switch Installation Services in Metro Atlanta, GA

New outlets where you need them, GFCI protection where code requires it, and USB or smart switches that work the first time. Tell us the room and we will handle the rest.

GA License EN213186 Family owned since 2001 4.9 Google, A+ BBB
Kalahari electrician checking a newly installed GFCI outlet above a bathroom vanity

EXPERT ELECTRICIANS

Your Trusted Source for Outlet Installation in Metro Atlanta

If you have been searching for outlet installation near me, Kalahari Electrical Services is the locally trusted answer for homeowners and businesses across Metro Atlanta. One of the first things you do when entering your home is reach for a light switch, and moments later you are plugging in a phone, laptop, or kitchen appliance. Switches and outlets are among the most heavily used electrical components in any building, and over time they wear out, loosen, or fall behind current safety codes.

Whether you need a simple electrical outlet replacement, a new circuit for a home office, or a full upgrade to modern USB and smart outlets during a renovation, our licensed electricians handle every type of switch and outlet project. New construction, remodeling, and even modest upgrades often increase electrical demand, making it critical to have properly rated receptacles and wiring installed by a qualified professional. Kalahari Electrical Services has been a family-owned Georgia contractor since 2001, and every job we perform is backed by our 100% satisfaction guarantee.

Close-up of plugging electrical cord into wall outlet representing everyday electrical usage

Types of Outlets and Switches We Install

Electrical needs vary from room to room and from home to home. Our technicians are professionally trained to install, replace, and upgrade every category of outlet and switch you may need, including the following:

  • Standard 15-amp and 20-amp outlets for general-purpose receptacles throughout bedrooms, living areas, and hallways.
  • GFCI outlets (Ground-Fault Circuit Interrupter) required by Georgia and National Electrical Code in kitchens, bathrooms, garages, laundry rooms, unfinished basements, and all outdoor receptacle locations. A GFCI outlet installation protects against electrical shock by instantly cutting power when it detects a ground fault.
  • AFCI outlets (Arc-Fault Circuit Interrupter) designed to prevent fires caused by arcing in damaged or deteriorating wiring, now required in most living spaces under current code.
  • USB outlets that integrate USB-A or USB-C charging ports directly into the receptacle, eliminating bulky adapters and freeing up plug space.
  • Smart outlets that connect to your Wi-Fi network, allowing voice control and scheduling through platforms such as Alexa, Google Home, or Apple HomeKit.
  • Dimmer switches for adjustable lighting levels, energy savings, and ambiance control in dining rooms, bedrooms, and entertainment areas.
  • 3-way and 4-way switches that let you control a single light or fixture from two or more locations, ideal for hallways, staircases, and large open-concept rooms.
  • Tamper-resistant outlets required by code in all new residential construction to protect small children from inserting objects into receptacles.

No matter which type of electrical outlet installation or switch upgrade your property requires, our team ensures the work meets or exceeds the latest Georgia building codes.

Severely burnt and corroded electrical outlet component representing the dangers of electrical faults

SAFETY FIRST

Warning Signs You Need Outlet or Switch Repair

Worn or faulty outlets and switches are more than an inconvenience; they can be a genuine fire and shock hazard. Before calling an electrician, we recommend two quick checks. First, make sure every switch connected to the outlet is turned on. Second, check the circuit breaker or fuse associated with that outlet to confirm it has not tripped. Outlets can often be reset at the breaker panel without a service call.

If the outlet still does not work, or you notice any of the following warning signs, contact a licensed switch installation electrician right away:

  • A strange or burning smell near the outlet or switch
  • Visible sparking when you insert or remove a plug
  • No electricity from the outlet after resetting the breaker
  • The faceplate, outlet, or switch feels warm to the touch
  • A slight electrical shock or tingling when using a switch or outlet
  • Plugs that fall loosely out of the receptacle
  • Frequently tripping breakers tied to a specific outlet circuit
  • Discolored, cracked, or melted outlet covers

Another issue our technicians frequently uncover is backstabbed wiring. This occurs when wires are simply pushed into the back of an outlet rather than being securely wrapped around the terminal screws. Although no specific code prohibits backstabbing, it creates a loose connection that can arc and pose a significant fire hazard, especially under frequent use. Backstabbed connections are extremely common in new builds and recently renovated homes. When you schedule any outlet service with Kalahari Electrical, our technicians inspect your wiring connections as part of the visit and walk you through anything that needs attention before any additional work begins.

Kalahari Electrical Services van parked in residential neighborhood

What Affects Outlet Installation Cost?

One of the most common questions homeowners ask is how much an electrical outlet installation or replacement will cost. Because every project is different, providing a one-size-fits-all price is not realistic or honest. Instead, here are the key factors that influence your final cost:

  • Type of outlet or switch: A standard duplex receptacle costs less in materials and labor than a GFCI outlet, AFCI outlet, smart outlet, or USB outlet with integrated charging ports.
  • New installation vs. replacement: Replacing an existing outlet in an already wired box is simpler than running new wiring to a location that has never had a receptacle.
  • Wiring and circuit capacity: If your panel lacks an available circuit, or if new wiring must be routed through finished walls, ceilings, or crawl spaces, additional labor and materials are involved.
  • Accessibility: Outlets in easy-to-reach interior walls are more straightforward than those in exterior brick walls, above-counter tile backsplashes, or outdoor locations requiring weatherproof enclosures.
  • Code upgrades: Older homes may require grounding upgrades, GFCI or AFCI protection, or tamper-resistant receptacles to meet current Georgia building code before a permit can be closed.
  • Permit requirements: Some municipalities within Metro Atlanta require permits for new circuit installations, and permit fees vary by jurisdiction.
  • Number of outlets or switches: Scheduling multiple installations in a single visit is more efficient and can reduce the per-unit cost compared to separate service calls.

We explain the work in writing before we begin. Contact us to request a estimate so you know exactly what your project involves and what each line item covers before any work begins.

Licensed electricians team representing Kalahari Electrical Services

CODE COMPLIANCE

Georgia Code Requirements for Outlets and Switches

Georgia adopts the National Electrical Code (NEC) with state-specific amendments, and outlet placement and protection requirements have become more stringent over the years. Understanding these code mandates is important whether you are building new, remodeling, or simply adding a receptacle.

GFCI protection is required in all of the following locations:

  • Kitchens (all countertop receptacles within six feet of a sink)
  • Bathrooms
  • Garages and accessory buildings
  • Outdoors
  • Crawl spaces and unfinished basements
  • Laundry areas
  • Areas near swimming pools, hot tubs, and spas

AFCI protection is now required in kitchens, laundry rooms, bedrooms, living rooms, dining rooms, hallways, closets, and similar living spaces. AFCI devices detect dangerous arcing conditions that standard breakers cannot sense, significantly reducing the risk of electrical fires.

Tamper-resistant receptacles (TRR) are mandatory in all new and renovated residential construction. These outlets include internal shutters that prevent children from inserting foreign objects.

Attempting a DIY outlet installation in an area that requires GFCI or AFCI protection can result in a failed inspection, void your homeowners insurance claim, or, worst of all, put your family at risk. A licensed switch installation electrician ensures every receptacle and switch is installed to code, properly grounded, and safe for daily use. Kalahari Electrical pulls all required permits and coordinates inspections so you have complete peace of mind.

Kalahari Electrical Services van parked in residential neighborhood

WHY KALAHARI

Metro Atlanta's Trusted Electrician Since 2001

Kalahari Electrical Services was founded in 2001 by Jan Rossouw and remains a family-owned and operated Georgia electrical contractor to this day. We hold Georgia license EN213186, and we are fully licensed and insured for residential and commercial work. Our 4.9 Google rating and A+ BBB rating reflect the level of care and quality workmanship our customers have come to expect.

Every technician on our team is background-checked, drug-tested, and professionally trained so you can feel confident about who enters your home. We stand behind every project with our 100% satisfaction guarantee, because your safety and happiness are the foundation of our business.

We proudly serve Lawrenceville, Suwanee, Duluth, Buford, Snellville, Lilburn, Norcross, Dacula, Grayson, Loganville, and communities throughout Metro Atlanta and Gwinnett County. Whether you need a single GFCI outlet installation in a bathroom, a whole-home electrical outlet replacement upgrade, or a consultation about smart switches and USB receptacles, we are ready to help.

Call 678-665-2309 today or use our online form to request your estimate. Let the Kalahari Electrical team show you why thousands of Atlanta-area homeowners trust us with their electrical needs.

Financing available

Spread the cost of your electrical project

Panel upgrade, EV charger or generator on a budget that works for you, through the Synchrony Project Card. Prequalify with no impact to your credit score.

FAQ

Frequently asked questions

Still have a question? Call 678-665-2309 and a licensed electrician will answer it.

How do I find a reliable electrician for outlet installation near me?

Look for a licensed and insured contractor with verified reviews and proper state credentials. Kalahari Electrical Services holds Georgia license EN213186, maintains a 4.9 Google rating and an A+ BBB rating, and has served Metro Atlanta since 2001. All of our technicians are background-checked, drug-tested, and professionally trained.

Is GFCI outlet installation required by code in Georgia?

Yes. Georgia follows the National Electrical Code, which mandates GFCI protection in kitchens, bathrooms, garages, outdoor receptacles, crawl spaces, unfinished basements, and laundry areas. If your home was built before these requirements were adopted, upgrading to GFCI outlets is one of the most important safety improvements you can make.

Can I do an electrical outlet replacement myself or should I hire an electrician?

Swapping a faceplate is a simple task, but replacing the outlet itself involves working with live wiring, proper grounding, and code compliance. Incorrect installation can create shock and fire hazards or void your homeowners insurance. We strongly recommend hiring a licensed electrician for any electrical outlet replacement to ensure the work is safe and up to code.

What is the difference between GFCI and AFCI outlets?

A GFCI outlet protects against electrical shock by detecting ground faults and cutting power almost instantly. An AFCI outlet protects against fires by detecting dangerous arcing caused by damaged or deteriorating wiring. Georgia code requires GFCI protection in wet locations and AFCI protection in most living spaces, so many homes need both types installed.

How much does electrical outlet installation cost in Metro Atlanta?

The cost depends on several factors, including the type of outlet, whether new wiring or a new circuit is needed, wall accessibility, code upgrade requirements, and the number of outlets being installed. Contact Kalahari Electrical Services at 678-665-2309 to request an estimate.

When should I call a switch installation electrician instead of troubleshooting on my own?

If a switch or outlet feels warm, produces a burning smell, sparks when used, delivers a slight shock, or causes repeated breaker trips, stop using it and call a licensed electrician immediately. These symptoms can indicate loose connections, backstabbed wiring, or deteriorating insulation that pose serious fire and shock risks. Our team can diagnose the issue safely and put the full scope of work in writing before any repair work begins.

Why us

What Makes Us the Best?

Quality You Can Trust.

Google Reviews

Because of our core values of Honesty, Integrity, and Reliability, we’ve achieved a 4.9 Google rating and an A+ rating from the Better Business Bureau.

  • Warranties & Peace of mind
  • Same-day appointments with available spots
  • 24/7 emergency services
  • Prompt award winning technicians

Ready when you are.

Licensed, insured and family owned since 2001. Call for same-day service or schedule online.

Call 678-665-2309 Schedule Service